On March 29, JOUAV officially released a new generation of CW-15 UAV, an intelligent long-endurance electric small UAV platform, which redefines the safety and reliability of industrial-grade UAVs.
The main innovations of the new generation of CW-15 UAV are as follows:
Active safety technology throughout the flight
Front and lower millimeter-wave obstacle avoidance radar. With obstacle avoidance and path planning algorithms, it can detect obstacles in real-time during all stages of take-off, aviation, and landing, with a sensing distance of 240 meters.
Binocular Intelligent Obstacle Avoidance. During the landing phase, the terrain is intelligently sensed, and the landing point is automatically screened. When the roof, cliff, electric pole, vehicle, personnel, and other hazards are found to land, real-time avoidance ensures the safe landing of the aircraft.
ADS-B situational awareness. During the flight, real-time monitoring of aircraft within 160 kilometers to achieve threat warning and automatic avoidance, and calmly respond to air traffic control.
Terrain matching flight technology. Based on high-precision digital three-dimensional maps, using fast global path search, path planning, and collision detection algorithms to achieve point-to-point intelligent terrain matching flight.
Aviation grade reliability
Multi-sensor redundancy technology. Three IMU redundancy management, main backup GNSS, dual differential antennas, and external magnetic compass direction finding, so that each node has fault management and automatic recovery and update capabilities.
All-digital bus avionics technology. The whole machine adopts all-digital bus avionics technology and online management of distributed avionics system networking, dramatically improving electrical reliability.
A revolution in the ease of use of fixed-wing drones
Automatic pre-flight inspection. One-click to complete multi-dimensional check of system status, sensor module, rudder surface, and power unit.
Automatic calibration of the magnetic compass in the air. The three-axis magnetic field of the magnetic compass is automatically calibrated in the air, which can quickly solve the tedious pre-flight inspection process.
Active firmware update system. Firmware matching and push through cloud service, online download, and update.
Download of wireless networking data. The drone, ground station, and control terminal network are integrated to easily manage all kinds of data generated during the operation through the wireless network.
Professional Software
Vertical and horizontal eagle map
New Vertical Eagle Chart software, 3D route planning and video monitoring, live streaming, AR overlay, video projection, real-time video fast spell, information labeling, and measurement.
Higher data quality
CA103 ortho camera + DS100 pan-tilt head
The mapping version is equipped with a 61-megapixel CA103 ortho camera and DS100 high-precision rotating head to guarantee the quality of images in a side-wind environment.
Super performance
Super environmental adaptability
Endurance time 180min, range 180km, maximum takeoff and landing altitude greater than 4500m, practical lift greater than 6500m.
Heating and drainage type airspeed tube
Equipped with a heated and drained airspeed tube and digital external atmospheric sensor, there is no need to worry about water and ice in the airspeed tube in low temperature, high humidity, and rainy environment.
New generation intelligent battery
Real-time battery status monitoring, intelligent equalization, intelligent storage, abnormal alarm/protection, low-temperature automatic heating, real-time dynamic estimation of battery capacity, charge/discharge safety protection.
Open architecture
Support deep integration and interconnection of 5G network connection modules
It supports the deep integration of the 5G communication terminal Hubble 1 on the airborne and ground terminals, realizing automatic switching between the radio data link and the 5G link.
Provide independent and powerful application processing platform
A new high-performance data application processor is added based on the existing flight control processor, which can easily handle multi-channel video surveillance, image recognition, AI, and GPU accelerated computer vision algorithms.
Modular bus-based SDK application development platform
Provide an open system architecture and a unified application control development interface, support user-defined load application development.
Standardized data protocol
The airborne and ground terminals support standardized data protocols, as well as user-defined data protocols.
Support remote data distribution
It can be connected to the public network and private network and supports remote data distribution through the network connection.
A new generation of JOUAV CW-15, safer and more reliable!
Media Contact
Company Name: Established
Contact Person: Janet Peng
Email: Send Email
Phone: +86 13350856325
Address:3A-8F, Jingrong Innovation Hub, No.200, 5th TianFu St., Hi-tech District
City: Chengdu
State: Sichuan
Country: China
Website: https://www.jouav.com/