In the industrial exhaust fan-cooling pad mode, the industrial exhaust fan is used to remove the dirty and hot air from the room, while the cooling pad wall installed opposite the industrial exhaust fan is used to inlet the air. When the outdoor fresh hot air passes through the wetted holes in the cooling pad wall, it exchanges heat with water and is filtered and cooled.
The cooling pad wall consists of two parts: the cooling pads and the frame. The cooling effect of the cooling pad wall must be when the cooling pad is completely soaked by circulating water, so that it can absorb the heat in the air and turn it into cold wind. If the cooling pad wall is not wet with water, the cooling pad wall will be just a piece of waste paper. So how to solve the problem of water-free cooling pad walls? Nantong Yueneng has compiled some methods for your reference.
1. Check whether there is water in the circulating water storage tank. If the circulating water storage tank is out of water or cannot meet the water consumption of the cooling pad wall, you need to add enough water immediately.
2. Check the circulating water to see if there is any dirt or debris blocking the water pipes. If the water pipes are clogged and the water cannot drain, you need to clear or replace the water pipes immediately.
3. Check whether the water supply pump is supplying water normally. If the water pump head and flow rate are not enough and the cooling pad does not wet the water, you need to replace it with a suitable water pump.
4. Check whether the cooling pad wall is installed horizontally. If the cooling pad wall is tilted or installed upside down during installation, and the cooling pad wall will not get wet, it needs to be installed correctly and horizontally again immediately.
5. Check whether the water supply pipe valve on the cooling pad wall is open. If the water supply pipe valve on the cooling pad wall is closed, the cooling pad wall will not get wet. You need to fully open the valve to ensure normal water supply.
article source: https://www.yncooler.com/news/how-to-solve-the-problem-that-the-cooling-pad-wall-is-not-wet/
Media Contact
Company Name: Nantong Yueneng Energy Saving Purification Equipment Co., Ltd.
Email: Send Email
Country: China
Website: https://www.yncooler.com/