Which motor is right for your needs? ACT Motor, one of China top 10 stepper motor manufacturers, suggests you choose a stepper motor if precision and control are your priorities, or a servo stepper motor is usually better if you value speed most. To help you make the correct decision, here five differences between them are further explained. 1. Different control accuracy.Two-phase hybrid stepper motor usually has a step angle of 1.8°, three-phase hybrid stepper motor has a step angle of 1.2°, and high-performance stepper motor even has a smaller step angle. The control accuracy of the AC servo stepper motor is guaranteed by the rotary encoder at the rear of the motor shaft. For a servo motor with a standard 2500-line encoder, the pulse equivalent is 360°/10000 = 0.036° due to the quadruple frequency technology used inside the driver. It’s unnecessary to pursue the highest accuracy of the motor, for neither mechanical drive accuracy nor position accuracy through photoelectric sensors is higher than the physical accuracy of stepper motor or servo stepper motor. 2. Different torque frequency.The output torque of a stepper motor decreases with the increase of speed, and decreases sharply at higher speed, so its maximum speed is generally from 0 to 900RPM. AC servo stepper motor has constant torque output, so it can output rated torque within its rated speed (generally 1000~3000RPM). 3. Different operation performance. 4. Different speed response performance. 5. It takes 100 to 2000 milliseconds for a stepper motor to accelerate from standstill to operating speed. AC servo stepper motor has better acceleration performance, accelerating from standstill to its rated speed of 3000RPM in a few milliseconds, which can be used in control situations requiring fast start/stop.