General packaging purposes, such as printing, laminating, aluminizing, coating, etc., mainly used for flexible packaging purposes. Transparent BOPET film is mainly used for: blister, folding box, packaging, printing, card making, high and mid-range tapes, labels, office supplies, collar lining, electronics, insulation, flexible circuit printing, display screensavers, membrane switches, films Window, printing film, imposition base, self-adhesive bottom paper, glue coating, silicon coating, motor gasket, cable tape, instrument panel, capacitor insulation, furniture peeling film, window film, protective film inkjet printing and decoration, etc.
Basic information:
Thickness:8-75μm
Width:50-3000mm
Roll diameter:300mm-780mm
Paper Core I.D:3 inch or 6 inch
Special specification can be customized
Performance characteristics
Good transparency, good product flatness, good processing performance, relatively small heat shrinkage
BOPET film is a polyester film that is made into a multifunctional polyester film by stretching polyethylene terephthalate (PET) in its two main directions Engineering film, the film has high tensile strength, chemical and dimensional stability, transparency, reflectivity, gas and aroma barrier properties and electrical insulation.
BOPET film makes many aspects of our modern life possible by providing key functions for end markets such as consumer electronics, automobiles, green energy, and medical equipment. However, so far, the biggest use of BOPET film is in flexible packaging structures, and its unique characteristics make it a pillar for the construction of high-performance MLP (multi-layer plastic) structures. BOPET film has incredible resource efficiency and weight in the flexible packaging market. Although BOPET film only accounts for 5-10% of the total volume and weight, the percentage performance of packaging structures that rely on the unique combination of BOPET film is much higher. Up to 25% of packaging uses BOPET as a key component.
Technical index
| ITEM | TEST METHOD | UNIT | STANDARD VALUE | |
| THICKNESS | DIN53370 | ΜM | 12 | |
| AVERAGE THICKNESS DEVIATION | ASTM D374 | % | +- | |
| TENSILE STRENGTH | MD | ASTMD882 | MPA | 230 |
| TD | 240 | |||
| BREAK ELANGATION | MD | ASTMD882 | % | 120 |
| TD | 110 | |||
| HEAT SHRINKAGE | MD | 150℃，30MIN | % | 1.8 |
| TD | 0 | |||
| HAZE | ASTM D1003 | % | 2.5 | |
| GLOSS | ASTMD2457 | % | 130 | |
| WETTING TENSION | TREATED SIDE | ASTM D2578 | NM/M | 52 |
| UNTREATED SIDE | 40 | |||
Media Contact
Company Name: CHANGZHOU HUISU QINYE PLASTIC GROUP CO.,LTD
Email: Send Email
Phone: 86-519-86872587
Country: China
Website: https://www.hsplasticgroup.com/