Water based wood glue is often used in our daily life, but when we use wood bonding glue, we need to focus on using wood joint glue in a right way. Below I will introduce and analyze how to use the two part glue for wood. 

Tips for using wood joint glue:   

1. The moisture content of the wood used for splicing is controlled between 8% and 15%

2. This can be better bonded together.   

3. Prepare pressurized equipment, clean, moisture-proof tools, and then prepare glue.   

4. The ratio of glue to curing agent must be thoroughly stirred to be as accurate as possible when comparing.   

5. The minimum transmission ratio of glue and hardener is 10:0.5 to 10:1, stirring all day, but it is much better, about 4 hours. When microbubbles are found to form normally, they can be used continuously. If there are too many bubbles, blow it up. Soak the wood in clean foam and reuse it.   

6. When applying glue for wood, we must apply the glue evenly on these surfaces. The processing speed of the glue coating, splicing and pressing system should be fast, otherwise the glue surface will solidify if it stays for too long.   

7. If the plate is large and as thick as possible, the anti-surface can be researched and cured, and the amount of glue is about 300g/m2. The latter plate must have some glue of its own and use the enterprise to flow. There is no glue and the abnormal structure of social liquidity assets is easy.   

8. After removing the glue or curing agent from the roller, make sure that the bag or lid is properly agitated to avoid long-term contact with air.   

9. Pressure balance pressure development, when the pressure is: softwood 6-10kg/cm2, hardwood 10-15kg/cm2.   

10. The longer the time, the better the pressure relief effect. If the time is long, the pressure relief of small area and plate can be less than two hours, and the pressure relief of large area plate can be less than five hours.   

11. After cleaning, use water for off-duty traffic management tools, use clean development production technology tools to change different water content but may not work, such as preparing multiple sets of tools (such as hair flushing, drumming).

Welcome to inquiry from our website. Here is Youxing Shark, professional water based wood glue from China.

Email:  youxingshayu@youxingqiye.com   Phone: +86 18521763668

Media Contact
Company Name: Youxing Shark (Shanghai) Science & Technology Co., Ltd.
Email: Send Email
Phone: +86 18521763668
Country: China
Website: https://www.sharkadhesive.com/